KOC supplier/almandite/natural abrasives garnet sand 3060mesh for sandblasting oil and gas pipelines
1. Garnet Sand picture
2.Garnet Sand Introduction
Sand blasting: garnet sand abrasive has features of good hardness, high bulk density, heavy specific weight, good toughness and no free silica. It is widely used in aluminum profile, copper profile, precision molds, and many other fields. And it is used for sandblasting, rust removing and surface treatment in stainless steel, carbon steel,steel structure, aluminum, titanium,galvanized parts,glass, stone, wood, rubber, bridge,shipbuilding,ship repair, etc.
3.Garnet Sand Size:
8/12 12/20 20/40 30/60 80# 100# 120#
8# 12# 16# 24# 30# 36# 46# 60# 80# 100# 120# 150#
4.Garnet Sand Characteristics
5.Garnet Sand Production process
6.Garnet Sand Applications
Water jet cutting
Water filtration
Sandblasting
A. Garnet sand blasting abrasive has features of good color, high hardness, long lifetime, self-sharpening,high grinding efficiency, low consumption, good finish and high recycling rate.
B. The sandblasting level of garnet sand is very high. It can penetrate into the holes and uneven parts to completely remove the oxide layer, corrosion, residual salts, burrs and other debris. The sand-blasted surface has no insert, no adverse convex point and pits, no embedded sand,and achieves SA3 blasting level with uniform surface roughness.
C. Garnet sand surface roughness can reach 45-55,50-75 microns. After sandblasting, the surface roughness is moderate which can effectively reinforce the adhesion between coatings and substrate.
D.Garnet Sand sandblasting has the features of high blasting speed, low consumption, low cost. Garnet sand is a cost-effective product that can replace quartz sand, copper slag, cinders, corundum, glass beads, etc.
E. After several times washing, garnet sand blasting abrasive has very low dust content and its dust emission is also low, which can keep a good working environment. It is harmless to the environment and humans, which can meet the requirements of occupational health and safety.
F. Garnet sand contains no free silicon, heavy metals and other harmful substances,and the chloride content is less than 50 ppm.It can meet the strictest requirements of industry and military technology.
7.Garnet Sand Test equipment and report
our garnet hardness 8 mohs, it is suitable for sandblasting and waterjet cutting
8.Packaging&shipping
Our Packages
1.25kg/bag(pp bag or paper bag) then 40 bags in one ton bag/pallet ,
2.one ton one bag
all packages are lined with waterproof materials
We can also pack according to your requirement.
9.Our Services
we can supply sample for free.
Customized Service
Product---We can produce various size abraisve according to the customers' requirements.
Package---The products can be packaged as customers' requirements.
After-sales Service
Our products passed ISO9001 standard, and we control the testing procedure strictly.
If there are quantity problems,package problems,delivery problems,or any other problems,our
company will seriously investigate the event and give customers a satisfying reply.
10.Company Information
Jinan Junda Industrial Technology Co.,Ltd. is located in Jinan,Shandong Province,China,which is the daughter company of Honest Horse (CHINA) Holding Limited.
We are the manufacturer of abrasive media for 13 years experience in north China, our customers spread over 90 countries around the world
that distribute in Asia,Europe,North America,South America and Australia,also in Africa.
11.OUR MINE PRODUCTS:
13.FAQ
Q : What is the mode of payment?
T/T: 50% advance payment then the rest 50% payment pay us when get the scanned B/L from our E-mail
L/C: 100% irrevocable L/C at sight
Q: What's the MOQ of your products?
As usual, MOQ 5TONS .Or as your require,we need to calculate the new price to you.
Q: Can you provide free samples?
Yes,we can send free samples less than 500g to you.
Q: What standards are you carrying out for your products?
SAE standard and ISO 9001, SGS
More details, please contact with anna
1. Garnet Sand picture
2.Garnet Sand Introduction
Sand blasting: garnet sand abrasive has features of good hardness, high bulk density, heavy specific weight, good toughness and no free silica. It is widely used in aluminum profile, copper profile, precision molds, and many other fields. And it is used for sandblasting, rust removing and surface treatment in stainless steel, carbon steel,steel structure, aluminum, titanium,galvanized parts,glass, stone, wood, rubber, bridge,shipbuilding,ship repair, etc.
3.Garnet Sand Size:
8/12 12/20 20/40 30/60 80# 100# 120#
8# 12# 16# 24# 30# 36# 46# 60# 80# 100# 120# 150#
4.Garnet Sand Characteristics
| Specific Weight | 4.1g/cm3 |
| Average Bulk | 2.4g/cm3 |
| Hardness | 8 Mohs |
| Crystal System | Cubic |
| Habit | Trapezohedron |
| Fracture | Sub-conchoidal |
| Free flow | 90% Minimum |
| Conductivity | Less than 25 Microsiemens per Meter |
| Radio Activity | Not detectable above background |
| Free Sinica Content | None |
5.Garnet Sand Production process
6.Garnet Sand Applications
Water jet cutting
Water filtration
Sandblasting
A. Garnet sand blasting abrasive has features of good color, high hardness, long lifetime, self-sharpening,high grinding efficiency, low consumption, good finish and high recycling rate.
B. The sandblasting level of garnet sand is very high. It can penetrate into the holes and uneven parts to completely remove the oxide layer, corrosion, residual salts, burrs and other debris. The sand-blasted surface has no insert, no adverse convex point and pits, no embedded sand,and achieves SA3 blasting level with uniform surface roughness.
C. Garnet sand surface roughness can reach 45-55,50-75 microns. After sandblasting, the surface roughness is moderate which can effectively reinforce the adhesion between coatings and substrate.
D.Garnet Sand sandblasting has the features of high blasting speed, low consumption, low cost. Garnet sand is a cost-effective product that can replace quartz sand, copper slag, cinders, corundum, glass beads, etc.
E. After several times washing, garnet sand blasting abrasive has very low dust content and its dust emission is also low, which can keep a good working environment. It is harmless to the environment and humans, which can meet the requirements of occupational health and safety.
F. Garnet sand contains no free silicon, heavy metals and other harmful substances,and the chloride content is less than 50 ppm.It can meet the strictest requirements of industry and military technology.
7.Garnet Sand Test equipment and report
our garnet hardness 8 mohs, it is suitable for sandblasting and waterjet cutting
8.Packaging&shipping
Our Packages
1.25kg/bag(pp bag or paper bag) then 40 bags in one ton bag/pallet ,
2.one ton one bag
all packages are lined with waterproof materials
We can also pack according to your requirement.
9.Our Services
we can supply sample for free.
Customized Service
Product---We can produce various size abraisve according to the customers' requirements.
Package---The products can be packaged as customers' requirements.
After-sales Service
Our products passed ISO9001 standard, and we control the testing procedure strictly.
If there are quantity problems,package problems,delivery problems,or any other problems,our
company will seriously investigate the event and give customers a satisfying reply.
10.Company Information
Jinan Junda Industrial Technology Co.,Ltd. is located in Jinan,Shandong Province,China,which is the daughter company of Honest Horse (CHINA) Holding Limited.
We are the manufacturer of abrasive media for 13 years experience in north China, our customers spread over 90 countries around the world
that distribute in Asia,Europe,North America,South America and Australia,also in Africa.
11.OUR MINE PRODUCTS:
- cast steel grit
- steel shot
- bearing steel grit
- low carbon steel shot
- garnet sand
- glass beads
13.FAQ
Q : What is the mode of payment?
T/T: 50% advance payment then the rest 50% payment pay us when get the scanned B/L from our E-mail
L/C: 100% irrevocable L/C at sight
Q: What's the MOQ of your products?
As usual, MOQ 5TONS .Or as your require,we need to calculate the new price to you.
Q: Can you provide free samples?
Yes,we can send free samples less than 500g to you.
Q: What standards are you carrying out for your products?
SAE standard and ISO 9001, SGS
More details, please contact with anna