It is applied to recover and purify various high-precision lubrication oil such as hydraulic oil, mechanical oil, coolant oil, gear oil, heat treatment oil and so on. And also can deal with heavy fuel oil. After treatment by this machine, the oil water content will be less than 80ppm, gas content will be less than 0.1%, filtering accuracy will be less than 5μm, cleanliness will be less than NAS grade6 . It can be used repeatedly in the highly precise hydraulic lubricating system.
1.Duplex 3D stereo-evaporation, removing the liquid water quickly
2.Adopt μg technology to remove tiny water, such as dissolved water
3.Combination of both network filtration and high polymer material absorbing,to remove impurities from oil
4. Strong capability of breaking emulsification
5. Adopt trapezoidal spiral automatic back flushing system,no need to clean filter element manually
6.Reasonable design, low noise pump, deep purification and low consumable cost.
When TYA starts working, oil will be sucked into heater by vacuum pressure, then the oil will be heated and flow into primary filter, where the big impurities are separated.
Then, oil flows into vacuum separator, and flows through a special designed device, which makes per unit volume oil to produce a large surface area, lets the oil exposure in low humidity atmosphere, so the gas and water are separated from oil.
The gas and separated water vapour forms as mixed gas, flows through water tank and cooler, condense into liquid and flows into water receiver, the residual gas is exhausted by vacuum pump.
Oil flows through oil pump and into fine filter, where the tiny impurities are separated.
If the oil is very dirty, or is high water content etc., you can purify the oil circularly for several times, by which to remove the water and impurities completely.
|Vacuum degree||Mpa||-0.06 ~ - 0.095|
|Temperature Degree||ºC||0 ~ 100|
|Power Supply||380V,3phase, 50HZ (or as required by customer)|
|Working noise||DB (A)||≤75||≤75||≤75||≤78||≤78||≤78||≤80||≤82|
|Total electric Power||KW||20||20||27||33||60||80||103||130|
|Inlet (outlet) Caliber||mm||25||25||25||32||42||42||50||60|
|Moisture (water content)||≤ 80 PPM|
|Demulsification||New oil≤15min, running oil≤30mi|
|Cleanness||≤NAS 1638 Grade 6|
The oil comparison before filtration and after firtration :
ZHONGNENG'S Main Products/Used Oil Solutions:
For Transformer Oil Filtration and Test:
Series ZY Single-Stage Vacuum Transformer Oil Purifier
Series ZYB Multi-Function Insulating Oil Treatment Equipment
Series ZYD Double-Stage High Vacuum Transformer Oil Purifier
Series ZYD-I Double-Stage High Vacuum Transformer Oil Regeneration System
ZV series Vacuum Pumping Device
Series JY On-Load Tap-changer Insulating Oil Purifier
Series IIJ-II Oil Tester (BDV Tester)
For Lube Oil/Hydraulic Oil Purification:
Series TYA Lubricant Oil Purifier Machine
Series TYC Lubricating Oil Regeneration System
Series TYA-I Phosphate Ester Fire-Resistance Hydraulic Oil Purifier
For UCO / Used Cooking Oil Vegetable Oil Purification:
Series COP Cooking Oil Filtration Unit
For Turbine Oil Reclamation:
Series TY Turbine Oil Purification Unit
Series TY-R Turbine Oil Regeneration System
For Fuel Oil Filtering:
Series TYB Light Fuel Oil Coalescence-Separation Purifier
For Black Engine Oil Regeneration:
Series LYE Waste Engine Oil Recycling System
For Simple Used Oil Purification and Oiling
Series PL Paper Plate Pressure Oil Filter
Series JL Portable Oil Purifier
For Explosion Proof Type Oil Filtration Needed:
Series EFD Explosion Proof Type Oil Filtration System
Cooperation Case :
Posted by Ruby