Roberts joins NevadaNano as European Sales Director

Portable flow meter provides on-demand pipe flow measurement without pro...

An efficient and cost-effective solution to monitoring air pollution in...

New partnership for confined space monitoring technology to provide prot...

New service for monitoring of environmental risks on Brownfield sites

Hazardous Materials: Spills and Soil Contamination – an ION Science we...

QED Environmental Systems partners with UPS® for carbon neutral shipping

Demand for natural gas is on the rise, distribution across the globe is a challenge that cannot always be overcome with pipelines, liquifying the gas is often the best solution as this process creates an almost 600-fold reduction in volume, enabling transportation by ship or truck. There are several steps for changing natural gas to liquid – and back to gas again, BARTEC provide reliable and precise instrumentation to help on each step of the way.

Gas metering is the first stage of the process – and analysing its quality to ensure that the contracted limits of impurities are not exceeded can be reliably carried out by the BARTEC BENKE HYGROPHIL F and HYGROPHIL HCDT; these highly reliable analysers will accurately determine water content and the hydrocarbon condensation point of the gas.

Natural gas condensate, made up from long-chained hydrocarbons, is expelled to give the gas a high level of methane. The condensate is then collected and stabilised so it can be processed further or sold on. BARTEC’s BENKE RVP-4 Reid Vapour Pressure analyser monitors this process according to ASTM D5191. This facilitates control of the condensate stabilisation process whilst maximising the yield of condensate. BARTEC BENKE’s RVP-4 and the HYGROPHIL F ensure that the safety and quality needs of this part of the process are met.

The next stage is dehydration, this involves removing water vapour by utilising a few molecular sieve dehydration vessels. Precise moisture measurement is key to this part of the process; the gas is cooled to – 160 deg C/-260 deg F, so deploying a BARTEC BENKE HYGROPHIL F in a multi-channel configuration at the bed outlet, or mid-bed section, will ensure that any excess of moisture is discovered early.

Finally, there is quality and fiscal metering required for regasification. These plants use metering skids to monitor quality and carry our fiscal metering before the gas re-enters the pipeline.

NevadaNano have recently appointed Karl Roberts as their new European Sales Director. Karl, who is based in Liverpool, is a B.A. (Hons) Business Administrat...

Restek has added two new mixed-mode, weak anion exchange (WAX) cartridges to its Resprep polymeric solid phase extraction (SPE) catalog. Available with 30 μ...

Accurate chemical analysis with FREE the digital precision from your smartphone-based test strip reader.  Make your rapid testing easier and more accurate...

The determination of trace levels of Hg is often performed by converting Hg to a vapor and measuring its concentration either by atomic absorption or by atom...

In This Edition ICMGP Preview - ICMGP 2022 mercury conference will be ‘virtual’ - Mercury – a persistent challenge Water / Wastewater - AI supports flow measurements - Emerging...

Aug 23 2022 Stockholm, Sweden and online

International Labmate Limited Oak Court Business Centre Sandridge Park, Porters Wood St Albans Hertfordshire AL3 6PH United Kingdom

T +44 (0)1727 858 840 F +44 (0)1727 840 310 E info@labmate-online.com

Copyright © 2022 Labmate Online. All rights reserved.