Published by Brian Gicheru Kinyua

Published by The Maritime Executive

Published by The Maritime Executive

Published Jan 2, 2022 5:00 PM by The Maritime Executive

Is there an easy way to prevent corrosion inside void spaces of idle equipment or permanent structures? This is a major need, primarily in the oil and gas industry but also in any industry that deals with metal tanks, piping, boilers, heat exchangers, hollow metal structures, or even hard-to-reach areas between the layers of metal coils. Fortunately, Cortec® has developed VpCI®-337, a time-tested alternative to nitrogen blanketing for easy, effective corrosion protection of void spaces.

The Challenges of Nitrogen Purge

Nitrogen purge or nitrogen blanketing is commonly used to protect metal void spaces from corrosion by replacing the oxygen with nitrogen gas. However, there are three challenges to the success and efficiency of this method. First of all, nitrogen gas is expensive, raising a cost barrier especially where large spaces are concerned. The second challenge is that nitrogen requires constant pressure with an airtight seal. This necessitates regular monitoring and complete reapplication if a leak does occur. Third, leaks also pose a safety hazard for personnel who unknowingly enter an area where the deadly gas has settled and may be overcome in moments.

The Advantages of VpCI®-337

By contrast, VpCI®-337 is much safer, cost-effective, and easy to apply and maintain. VpCI®-337 is a waterborne Vapor phase Corrosion Inhibitor that can be applied by fogging into metal void spaces. This labor-saving technique uses a minimum of product to protect large areas or volumes. Vapor phase Corrosion Inhibitors in the fogging fluid diffuse throughout the void and are attracted to metal surfaces where they “condense” and form a protective molecular layer. This layer inhibits the corrosion reaction on the metal surfaces even in the presence of oxygen and residual moisture. The space must be completely closed for the corrosion inhibitors to be effective, but an air-tight seal is not required as for nitrogen purge. At the end of the preservation period, there is usually no need to remove the VpCI® layer—although this is easily done if needed.

VpCI®-337 Scope of Use

Another advantage of VpCI®-337 is its versatility. VpCI®-337 can provide corrosion protection for everything from massive heat recovery steam generators to small crates of metal parts. The following are real-life examples of how VpCI®-337 has been used:

Internal preservation of pig receivers enroute from construction yard to offshore installation site One-year protection of aboveground storage tank (AST) internals at a sulfur recovery plant Preservation of spare heat-exchanger tube bundles (in conjunction with VpCI®-132 and MilCorr® VpCI® Shrink Film) previously stored in nitrogen-pressurized canisters Temporary protection of fuel tanks in retired aircraft stored outdoors during museum renovation Transit protection of automotive frames shipped inside sea containers (VpCI®-337 fogged inside VpCI®-126 Film covered skids) Protective packaging element used for shipment of horizontally-opposed piston aircraft engines

VpCI®-337 is also an excellent option for manufacturer edge treatment of coils, fogging of oil drilling risers, internal protection of metal tubular structures, and much more.

The products and services herein described in this press release are not endorsed by The Maritime Executive.

Published Jul 29, 2022 9:59 PM by Mia Bennett

In the 3rd century BC, Rhodian seafarers sailing the wine-dark waters of the Mediterranean established the foundations of maritime law. Regulating everything from bills of lading to standards of passenger behavior, their guidelines were formalized in the 7th century AD under the Byzantine Empire. Constantinople’s role is fitting, for today maritime governance involves a truly byzantine world including national governments, international organizations and classification societies. Class societies occupy an unusual role in ensuring safety at sea. They’re both rule-makers and...

Published Jul 29, 2022 9:29 PM by Brian Gicheru Kinyua

Besides congestion, strikes at major ports in Europe, Asia and North America have become another addition to multiple challenges facing shippers. UK is the latest country teetering on the edge of a potential port strike. This could severely affect shipping at Felixstowe and Liverpool, two of UK’s major ports. Interestingly, the port strikes have spread to countries like Germany, where they have not occurred in the last three decades. But why are port workers downing their tools at a time...

Published Jul 29, 2022 9:15 PM by The Maritime Executive

Energy majors BP and Iberdrola announced plans to form a new joint venture designed to help in the acceleration of decarbonization of transport and industrial sectors. Together, the companies intend to collaborate to develop large-scale green hydrogen production that could be used in the maritime and other industries as well as efforts to significantly expand the fast EV public charging infrastructure to support the adoption of electric vehicles.  “Creating the lower carbon energy solutions that our customers want and need...

Published Jul 29, 2022 9:09 PM by The Maritime Executive

Transnet National Ports Authority (TNPA) South Africa has issued a request for information for project ideas for the supply of renewable energy at South Africa’s main commercial ports. The ports targeted under TNPA’s renewable energy program include Port Elizabeth, Ngqura, East London, Mossel Bay, Saldanha Bay, Cape Town, Durban and Richards Bay. In issuing the call on Monday, TNPA said the RFI process would allow it to understand the renewable energy market. Specifically, the aim is to expand use of...

© Copyright 2022 The Maritime Executive, LLC. All rights reserved.