Applicable raw materials:
Crude oil, waste engine oil, gear oil, sludge, waste plastic oil, waste tire oil and other liquid raw materials
Catalyst use temperature conditions:
The gas phase catalyst has the best reaction effect between 250°C and 450°C in the distillation equipment. It can be used twice but needs to be processed at high temperature again, but the effect is reduced by about 30-50%.
Gas-phase catalyst is used for gas-phase catalysis. It is packed in the catalytic tower. The bottom of the catalytic tower is filled with ceramic packing. Be careful not to contact with the liquid. The catalyst is packed on it. The filling amount of the two depends on the oil volume of the equipment. The space velocity is guaranteed. Under the right conditions, safety and catalytic effects can be ensured, and all the pyrolysis of the tail oil from the first oil to the end of the refining can be achieved, and the oil produced has a small taste, a clear color and no turbidity. The quality of oil has been significantly improved, and the later use can reduce the pollution of the atmosphere, truly achieve resource recycling, no secondary pollution, and become a green and environmentally friendly high-tech new energy. In the distillation process, the light components in the early stage and the heavy components in the later stage of the equipment are best not to pass through the catalytic tower with the catalyst. This can extend the service life of the catalyst and reduce the use cost.